phone
DECOMMISSIONING TECHNOLOGIES
SINCE 1848

Modular System

BRAUN Modular System

The BRAUN modular system opens up a wide range of new application possibilities, saves high investment costs and significantly reduces assembly time. With the modular design, existing machines can be used for new applications. This system is not only attractive for sawing and drilling specialists, but can also be used individually for other purposes. Saw cuts and drill holes can also be made in components where direct attachment to the component is not possible.

BBZ1

The combination system

The design of this system is based on BRAUN wall saw tracks.
The BBZ1 is the single-column version of the modular system for drilling, whereby vertical wall saw cuts can also be made. A dowel-less installation is possible, as the frame can be supported against the ceiling.
Various feed drives, from manual to hydraulic, are available for this combination system. Drill bits up to a diameter of 500 mm can be used with the BBZ1.
Set consisting of:
1x base plate for doweling
1x slide
1x support

Technical data

Drill bit diametermax. 500 mm
Drill bit lengthca. 2000 mm
Track lengthmax. 2250 mm

Accessories

  • Threaded braces for ceiling bracing
  • Swivel drilling bracket
  • Drill motor mounts
  • Steady rest for drill bits
  • Various feed drives - electric, pneumatic and hydraulic
BBZ2

The combination system

The design of this system is based on BRAUN wall saw tracks.
The BBZ2 is the two-column version of the modular system for large bores. Furthermore, vertical wall saw cuts can also be performed. An assembly without dowels is possible, as the frame can be supported against the ceiling. Due to the extension possibilities of the modular system, a multitude of drilling tasks can be covered with the BBZ2.
Various feed drives, from manual to hydraulic, are available for this combination system. Drill bits up to a diameter of 1000 mm can be used with the BBZ2.
Set consisting of:
2x base plate for doweling
1x connector
1x connecting plate
2x support
* trapezoidal thread design upon request

Technical data

Drill bit diametermax. 1000 mm
Drill bit lengthapprox. 2000 mm
Track lengthmax. 2250 mm

Accessories

  • Threaded braces for ceiling bracing
  • Swivel drilling bracket
  • Drill motor mounts
  • Steady rest for drill bits
  • Various feed drives - electric, pneumatic and hydraulic
Saw frame

Universally applicable

From core drilling to wall sawing and wall shaving. The saw frame significantly reduces assembly times and extends the application field of the wall saw.
The frame allows a wide variety of cuts from one position. Diagonal openings can be cut efficiently thanks to optionally available rotary units. Up to a room height of 3.5 m, the frame can be spread against the ceiling so that no dowel holes are required.
Set consisting of:
2x base plate for doweling
2x rotary unit
2x double clamping plate
2x support
2x support bracket
2x clamping unit
2x threaded brace
1x traverse

Technical data

Track lengthmax. 2250 mm

Accessories

  • Threaded braces for ceiling bracing
  • Swivel drilling bracket
  • Rotary unit
  • Double clamping plate for 90° track mounting
  • Various feed drives - electric, pneumatic and hydraulic